Table of Contents
Advertisement
Installation Procedure (Windows 2000 or later)
The procedure for installing the print driver differs depending on how DocuPrint C1190 FS and the
computer are connected.
Installing when connected via TCP/IP
■
Installing when connected via USB
■
Installing when connected via TCP/IP
To install the print driver from the Software Pack CD-ROM:
1.
Insert the CD-ROM into the computer's CD-ROM drive. If the installer does not launch, do the
following:
a.
Click Start, and then click Run.
b.
In the Run window, enter: <CD drive>:\Launcher.exe.
c.
Press the Enter button.
2.
From the Main tab, select Print Driver.
3.
Select the installation method you want to use, and then follow the onscreen instructions.
Note:
SimpleMonitor is a separate option from the print driver. To install SimpleMonitor, use the Software
Pack CD-ROM.
Installing when connected via USB
1.
Turn off the printer.
2.
Connect the computer and C1190 SF with a USB cable.
3.
Turn on the printer.
If a setup screen requests for you to specify the driver's location while new hardware is being detected,
insert the Software Pack CD-ROM into the computer's CD-ROM drive. Found New Hardware
Wizard is displayed.
Note:
If the Driver CD Kit screen starts, press the Exit button to close the screen.
4.
Specify by following the example below where the driver to be stored. Never select Search for a
suitable driver for my device (recommended).
For x32 driver: "(CD-ROM drive name):\Eng\FXPS\PCL\Win2000_XP"
■
For x64 driver: "(CD-ROM drive name):\Eng\FXPS\PCL\x64"
■
5.
Continue the procedure according to the instructions of the installer.
6.
Follow the procedure below according to the OS you are using.
Windows 2000: Select Start > Settings > Printers.
■
Windows XP or Windows Server 2003: Select Start > Printers and Faxes.
■
Windows Server 2008: Select Start > Control Panel > Printers.
■
Windows Vista: Select Start > Control Panel > Hardware and Sound > Printers.
■
The Printers screen is displayed.
Once the print driver has been installed, a printer icon is added on the Printers screen.
7.
Right click on the printer icon, and select Properties or Runs as administrator > Properties
(Windows Server 2008 or Windows Vista).
The Properties dialog box is displayed.
8.
Verify that a USB port is specified in Print to the following port(s) or Print to port (Windows XP,
Windows Server 2003/2008, or Windows Vista) on the Port tab.
4-10
Installing the Print Drivers
Advertisement
Table of Contents
