Removing The Top Cover - IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual

Removing the top cover

Note: The illustrations in this document might differ slightly from your hardware.
Captive screws
To remove the server top cover:
1. Loosen the two thumbscrews on the back edge of the top cover.
2. Slide the top cover slightly toward the rear of the server. Lift the cover off the
server and set the cover aside.
Attention: For proper cooling and airflow, replace the top cover after installing
Top cover
or removing an option. Operating the server for extended periods of
time (over 30 minutes) with the top cover removed might damage
server components.
45
Installing options