Deleting The Database; Cataloging The Database In The Managing System - IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual

2. Use the CONNECT RESET command to disconnect current users from the
3. Use the NETFINDB GRANT command to grant (or revoke) database privileges.
Cataloging the database in the managing system: If the manager is using a
remote database, catalog the node the database resides on and then catalog the
database to that node.
Once this step has been completed, the name of the Netfinity Manager database
will appear in the System Information Tools Database Selection window.

Deleting the database

The following information describes how to delete the database for all supported
operating systems.
90
Hardware Maintenance Manual: Netfinity 7100 – Type 8666
Note: Specify PUBLIC or authorize only specific manager systems. To limit
access to the database, substitute the authorization name of the
managing system for PUBLIC.
database.
Type the following command at the OS/2 prompt:
DB2 CONNECT RESET
and then press Enter.
To grant or revoke table privileges on OS/2:
a. Insert the Netfinity Manager CD into the CD-ROM drive (in this example,
drive D; individual drive letters might be different).
b. Make the CD-ROM drive the active drive.
Type D: and then press Enter.
c. Type the following command:
NETFINDB GRANT /ID=id PUBLIC /DBNAME=databasename /PRIV=privilegecode
where
v id is the user ID to be granted access
v databasename is the name of the database as specified during NETFINDB
execution
v privilegecode is one of the following privilege codes:
– ALL
– ALTER
– CONTROL
– DELETE
– INDEX
– INSERT
– REFERENCES
– SELECT
– UPDATE
d. Press Enter to execute the command.
Note: Use PUBLIC or authorize only a specific ID or group name. Netfinity
Manager update programs use the DB2SQLC0 package and do not
require specific table privileges.
To revoke privileges, substitute REVOKE for GRANT in the command line.
To configure Netfinity Manager to discontinue export data through ODBC for
use on DB2, refer to "ODBC database support" on page 93.