IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual page 66

Note: The illustrations in this document might differ slightly from your hardware.
To install a memory module:
Before you begin:
v Read "Safety information" on page 152.
v Read the documentation that comes with your option.
56
Hardware Maintenance Manual: Netfinity 7100 – Type 8666
1. Review "Before you begin" on page 43.
2. Turn off the server and all attached devices. Disconnect external cables and
power cords and remove the top cover.
3. Pull up the two pop rivets on the processor housing cover and remove the
cover from the processor housing.
4. Remove the memory board assembly:
a. Lift up on the memory board assembly and remove it from the server.
b. Place the memory board assembly on a static-protective surface, such as
the static-protective package in which the option came.
5. Locate the DIMM connectors on the memory board. Determine the DIMM
connectors into which you will install the DIMMs. (See the notes at the
beginning of this procedure.)
6. Touch the static-protective package containing the DIMM option to any
unpainted metal surface on the server. Then, remove the DIMM from the
package.
Note: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently.
Pop rivets
Processor housing
cover
DIMM
Memory board