Serveraid - IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual

ServeRAID

For ServeRAID error codes and procedures, refer to the Hardware Maintenance
Manual for the particular RAID adapter in the system being serviced.
Error Code/Symptom
01298003 (No update data for
processor 3)
01298004 (No update data for
processor 4)
01298101 (Bad update data for
processor 1)
01298102 (Bad update data for
processor 2)
01298103 (Bad update data for
processor 3)
01298104 (Bad update data for
processor 4)
I9990301 (Fixed boot sector
error)
I9990305 (Fixed boot sector
error, no operating system
installed)
I9990650 (AC power has been
restored)
FRU/Action
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 3
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 4
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 1
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 2
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 3
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 4
1. Hard Disk Drive
2. If RAID system, refer to the ServeRAID Hardware
Maintenance Manual for more information.
3. SCSI Backplane
4. Cable
5. I/O Legacy Board
1. Install operating system to hard disk drive.
1. Check cable
2. Check for interruption of power supply
3. Power Cable
137
Symptom-to-FRU index