Chapter 4
Configuring TCP/IP Normalization and IP Reassembly Parameters
Clearing Connection Statistics
Clearing IP, TCP, and UDP Statistics
Clearing IP Statistics
Note
OL-16202-01
You can clear all connection statistics in the current context by using the clear
stats conn command in Exec mode. The syntax of this command is as follows:
clear stats conn
For example, to clear all connection statistics in the Admin context, enter:
host1/Admin# clear stats conn
Use the commands in this section to clear IP, TCP, and UDP statistics. This section
contains the following topics:
Clearing IP Statistics
•
Clearing TCP Statistics
•
Clearing UDP Statistics
•
You can clear IP statistics by using the clear ip statistics command in Exec mode.
This command clears all statistics associated with IP normalization,
fragmentation, and reassembly in the current context. The syntax of this command
is as follows:
clear ip statistics
For example, to clear IP statistics in the current context, enter:
host1/C1# clear ip statistics
If you configured redundancy, then you need to explicitly clear IP statistics on
both the active and the standby ACEs. Clearing statistics on the active appliance
alone will leave the standby appliance's statistics at the old values.
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
Clearing TCP/IP and UDP Connections and Statistics
4-65