Saving The Edited Programmed Stitch; Quitting Programmable Stitch Creator; Design Center - Brother PE-DESIGN2.0 Instruction Manual

Step 4

Saving the Edited Programmed Stitch

In order to apply your edited stitch pattern to a region in Layout & Editing or Design Center, you must first
save it as a file. To do this, proceed as follows.
pas
1
Click on the menu bar, then click
File
You can also click on the button of the Toolbar shown below:
Since the files that come with your program are "Read Only" files and cannot be overwritten,
pas
the dialog opens.
Save as
2
Type in a file name and select another target folder if you want to save your own stitch pattern files
separately.
Step 5

Quitting Programmable Stitch Creator

Now that you have created a stitch pattern, you may close this application as you will no longer need it for
this exercise.
1
Click on the menu bar, then click
File
If you have saved your file as recommended in the previous step, the application will close immedi-
ately. If you have changed anything after the last time you saved the file, you will be asked whether
you want to save the file. Click
48
on the submenu.
Save
on the submenu.
Exit
, then proceed as explained in the previous step.
Yes
Select the drive, the folder and type the
file name.
Click to save.
Save
Click to exit.
Cancel