Adjusting The Size And Location Of The Oval; To Change The Size Of The Oval - Brother PE-DESIGN2.0 Instruction Manual

If, for any reason, you want to delete the oval and draw it again, click
the oval to select it, then press
If you wanted to attribute a color or a stitch type to the oval after drawing it, click
Box, then click on the oval to select it and click on the
ing Attributes bar for the oval will show the current settings and allow you to change them.
Step 6

Adjusting the Size and Location of the Oval

We are going to adapt the size and aspect ratio of the oval and move it to its final position.

To change the size of the oval

If your oval looks very different from the one shown in the illustration above, proceed as follows to
modify its size and proportions.
1
Click on the Tool Box.
2
Click the oval to select it. The shape of the cursor changes from
3
Move the cursor over one of the handles of the oval.
The shape of the cursor will change to
sor is on.
4
Drag the handle in the direction of the arrow to scale the pattern.
is for scaling the width.
is for scaling the height.
and are for scaling both dimensions at the same time.
30
or click
Delete Edit – Delete
Line sew
, ,
on the Tool Box, click on
on the menu bar.
and
Region sew
to
or , depending on the handle the cur-
on the Tool
buttons. The Sew-
.