Brother PE-DESIGN2.0 Instruction Manual page 47

4
Change the row offset. Make sure the
ing and holding the mouse button down on either arrow or by typing the value directly in the edit
box window.
NOTE:
You can only choose to change either the row or the column offset for a given pattern. You cannot
select both for the same stitch pattern.
5
Change the direction of the pattern. Rotate the pattern to the right by clicking on the "down" arrow
until a value of
340 degrees
•
For more information on the different settings of a programmed stitch, see "Sewing Attribute
Setting" on page 144.
6
Click .
Apply
The stitch and its settings are set. Until they are changed again, those sewing settings, just like
any other, will be applied to every new region that you draw.
7
Finish setting the remaining sewing attributes for the ray pattern that you will create in the following
step.
Select a region color using the
8
Select a line color and stitch using the
. (You can also set the characteristics of the pitch in the
ing Attribute Setting
row
is selected. The
Region color
Line color
dialog.)
button is selected, then set a row offset of
Sewing Attribute Setting
button.
button and the
by click-
50 %
dialog will look like this:
selector
Line sew type
tab of the
Line sewing Sew-
37