Installing The Software; System Requirements - Brother PE-DESIGN2.0 Instruction Manual

System Requirements

Before you start installing the software on your PC, check that your system meets the following require-
ments. If it does not, consult your dealer.
PC
CPU
Windows
Memory
Hard disk free space
Display
Serial port
Mouse
Printer
Installing
4
3
5
6

Installing the Software

IBM-PC or compatible
80486 or more
Windows 3.1 or Windows 95
12M or more (we recommend 16M or more because 12M might not be
enough for some computers)
6M or more
VGA or more (we recommend a minimum of 256 colors SVGA)
An RS-232C port that is not used with other peripherals
A mouse that is supported by your version of Windows.
A graphic printer that is supported by your system (if you wish to print
your images)
1
•
2
3
4
5
6
7
Start Windows (refer to the Windows manual).
If you have other Windows applications running,
click to exit, close all the other applications
Cancel
and start again.
Insert the disk marked Disk1 into your floppy disk
drive.
Click .
Click on the menu. The
Run
NOTE:
In the case of Windows version 3.1, starts from
File-Run in the Program Manager Menu.
Type the full path of the installation program.
Example: if the disk is in drive A, or
A:\Setup
if the disk is in drive B.
B:\Setup
Click to start the installation program.
OK
Wait until the panel shown here is replaced with
the dialog shown next.
Welcome
dialog appears.
Run
3