Brother PE-DESIGN2.0 Instruction Manual page 45

3
Set the sewing attributes of the outline stitch.
Select
Sew – Sewing Attribute Setting
The
Sewing Attribute Setting
4
Set the sewing attributes of the region. Click on the
button and the
Region sew type
stitch. In this example, we will leave the other sewing attributes of the region as is.
Your display will look as follows.
. You can also click the button of the Toolbar shown below.
dialog opens.
selector
Set the width of the zigzag stitch to
.
1.0 mm
Click .
Apply
Region sew button
appear and select a region color and a
so that the
Region color
35