Path Shape; Setting Text Attributes; Font - Brother PE-DESIGN2.0 Instruction Manual

Operation:
1
Type the desired value on the Edge radius selector (0 ~ 100 mm or 0 ~ 3.93 inches) and press the
key or click on the Edge radius selector to display the available values.
Enter
2
Click the desired value.
The setting applies to all the patterns that you will create in the Rectangle Drawing mode until you
change the setting.
If a rectangle is selected, the setting also applies to that rectangle.
See also:

Path shape

Purpose:
Available:
Operation:
1
Click on the Path shape selector.
Two options are available.
2
Click the desired option.
The setting applies to all the patterns that you will create in the Line or Curve Drawing mode until
you change the setting.
If a broken line or curve is selected, the setting applies to that broken line or curve.
See also:

Setting Text Attributes

Font

Purpose:
Available:
"Rectangle Drawing Mode" on page 105
Opens and closes broken lines and curves.
When you click or
mode.
When you select an existing broken line or curve with the cursor in Selection
mode.
"Line Drawing Mode" on page 105, "Curve Drawing Mode" on page 106
Selects a font for text.
When you click on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
on the Tool Box to start the Line or Curve Drawing
111