Delete; Mirror – Horizontal; Mirror – Vertical - Brother PE-DESIGN2.0 Instruction Manual

Operation:
1
Click , then
Edit Paste
The patterns saved in the clipboard (using
See also:

Delete

Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select one or more patterns.
2
Click , then
Edit Delete
The selected pattern(s) are removed from the screen. Since they are not saved in the clipboard,
the only way to make them reappear is to use
See also:
Mirror – Horizontal
Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select one or more patterns.
2
Click , then
Edit Mirror
The selected pattern(s) are replaced by their horizontal mirror image (top and bottom inverted).
Two successive applications of this function restores the original image.
Note that some patterns installed from a card cannot be flipped.
See also:
Mirror – Vertical
Purpose:
Shortcut key:
Toolbar:
Operation:
1
Select one or more patterns.
134
.
"Cut", "Copy" and "Duplicate" above
Removes the selected pattern(s) from the screen without saving them in the clip-
board.
Delete
No button for this function
.
"Undo" on page 132, "Cut" on page 133
Flips the selected pattern(s) up/down.
+
Ctrl H
, then .
Horizontal
"Mirror – Vertical" on page 134, "Rotate" on page 135
Flips the selected pattern(s) left/right.
+
Ctrl J
or ) are pasted on the screen.
Cut Copy
.
Edit – Undo