Using The Stage 3 Tool Box - Brother PE-DESIGN2.0 Instruction Manual

In Stage 3, outline data that has been generated automatically can be edited using the Tool Box.
Clicking a button of the Tool Box changes the cursor mode and shape. The left side of the Status bar tells
you what you can do in each cursor mode.
Sets the cursor in selection mode.When you start the application, the selec-
tion mode is active by default. Cursor shape:
Sets the cursor in point edit mode.
Cursor shape:
Sets the cursor in line drawing mode.
Cursor shape:
Sets the cursor in zoom-in mode.
Cursor shape:
Maximizes the selected Design Page to fit in the window.
Sets the cursor in zoom-out mode.
Cursor shape:
Fills the display with the selected objects.

Using the Stage 3 Tool Box

page 51
page 56
page 57
page 57
page 58
page 58
page 58
53