Selecting A Programmed Stitch - Brother PE-DESIGN2.0 Instruction Manual

Step 11

Selecting a Programmed Stitch

You are going to see how to select a special stitch pattern (fill stitch) created with the Programmable
Stitch Creator application, how to change its settings and how to apply it as the region stitch for the rays,
which you will draw in Step 12. Stitch patterns are arranged in a tile-like manner within the selected
regions, creating very decorative fill stitches.
1
Select
2
Click
Sew – Sewing Attribute Setting
You can also click on the Toolbar button shown hereafter.
3
Change the stitch pattern size. Select a width and height of
NOTE:
As soon as you click an arrow in this dialog, an illustration of the stitch pattern as well as the type
of setting you are selecting are displayed in the other preview window of the dialog. You can see
how each click on an arrow affects the pattern.
You may also type in a value. In that case however, you cannot preview the setting immediately as
you set it.
36
in the
Region sew type
on the menu bar to open the
selector.
Sewing Attribute Setting
Click the
the region sewing attributes.
Click
Browse
log.
Select the path Program Files/Version
2.0/Pattern.
The Pattern folder contains the pro-
grammed stitch files. These files have
the extension
The
Browse
now allows you to preview and
browse through the existing
Browse through the illustrated stitches and
click on the
wave1
highlighted.
Either double-click the illustration or click
select that stitch. The dialog closes and the
selected stitch can now be previewed in the
Sewing Attribute Setting
10.0 mm
dialog.
tab to display
Region sewing
to open the
Browse
.
pas
dialog shown hereafter
pas
illustration, which is then
dialog.
by clicking on the "up" arrow.
dia-
files.
to
OK