Changing The Sewing Order Of Sun And Rays; Adjusting The Rays - Brother PE-DESIGN2.0 Instruction Manual

Step 13

Changing the Sewing Order of Sun and Rays

Since we have drawn the broken line after drawing the circle, the broken line pattern is in the foreground
of the screen, and the circle is behind. A pattern that is in the foreground of the screen is sewn last. Since
we do not want the embroidery to show the part of our broken line that is inside the circle of the sun, we
are going to reverse the sewing order.
1
Click on the Tool Box, then click on the ray pattern to select it.
2
Click on the menu bar, then click
Edit
You can also click on the Toolbar button shown hereafter.
This will move the ray pattern to the back of the circle.
If necessary, move the circle so that it looks centered relative to the ray pattern.
Step 14

Adjusting the Rays

At this step you might wish to modify slightly the rays. You can do that by moving, deleting and adding
points on the broken line pattern.
1
Click on the Tool Box and select the ray pattern.
2
Click on the Tool Box.
Two buttons appear:
3
Click .
The shape of the cursor changes to
small empty squares.
4
Click the point that you want to move.
The selected point is marked with a small black square.
on the submenu.
Sew First
.
and the existing points of the pattern are marked with
39