Using Design Center - Brother PE-DESIGN2.0 Instruction Manual

In this section, we are going to create an embroidery pattern. That pattern will be created by automatic
retracing of a bitmap image. This pattern will be used later as the stepping stone to creating a more com-
plex embroidery picture.
The complete procedure will take us through the different steps of a normal working session with Design
Center and will introduce you to its most important features.
Step 1 Starting Design Center
Step 2 Opening a Bitmap Image
Step 3 Converting to Line Image
Step 4 Editing Lines
Step 5 Converting to Figure Handle Image
Step 6 Moving to Sew Setting
Step 7 Setting Sewing Attributes
Step 8 Previewing the Image
Step 9 Saving the File
Please follow these instructions step by step, in the sequence given. If you have to interrupt your training
for any reason, it is recommended to save the file (see Step 9). You will be able to retrieve it later and
resume your work.

Using Design Center

page 10
page 11
page 12
page 13
page 15
page 16
page 16
page 20
page 21
9