Brother PE-DESIGN2.0 Instruction Manual page 149

Operation:
1
Select one or more text patterns.
2
Click , then
Text Text Attribute Setting
The
Text Attribute Setting
Sets the spacing between individual char-
acters.
Kerning
Range: -100 ~ 100 mm (-3.94 ~ 3.94 inches)
Default: 0
Moves the text vertically.
Vertical Offset Range: -100 ~ 100 mm (-3.94 ~ 3.94 inches)
Default: 0
Rotates the characters.
Rotate angle Range: 0 ~ 359 degrees
Default: 0
Sets the spacing between all characters.
Character
Range: -100 ~ 100 mm (-3.94 ~ 3.94 inches)
Spacing
Default: 0
Sets the spacing between lines in percents
of the character height.
Line Spacing
Range: 0 – 1000%
Default: 0
Aligns several lines of text to the left,
Alignment
center or right.
Note that both
Kerning
that
Character Spacing
individual characters. If you apply
. See "Selecting characters on a text pattern" on page 100 for more details about selecting
Spacing
individual characters in a text pattern.
See also: "Fit Text to Path Setting" and "Transform Text" on page 142
.
dialog displays.
and
Character Spacing
is always applied to the entire text pattern, while
to the entire text pattern, it works exactly like
Kerning
Enter the desired values for each set-
ting.
To restore the default value of an indi-
vidual setting, click its
Click
Apply
setting.
Click
Close
0.0 mm
0.0 mm
0 degree
0.0 mm
100%
Center
set the spacing between characters. The difference is
button.
Default
to confirm the effect of the
to remove the dialog.
5.0 mm (between
"A" and "b")
2.0 mm
20 degree
2.0 mm
150%
Right
can be applied to
Kerning
Character
139