Drawing An Arc & String - Brother PE-DESIGN2.0 Instruction Manual

You can also set the sewing attributes using the
144). You must decide now which kind of circle-related graphic you need.
2
Click the
Arc shape
3
Proceed as you would to draw a circle or an ellipse.
When you release the mouse, a radial line appears on the ellipse.
4
Move the cursor (without dragging) to the start point of the fan shape and click.
The radial line disappears.
5
Move the cursor (without dragging) to the end point of the fan shape and click.
Click at start point
Drawing an arc & string
1
Click on the Tool Box.
The shape of the cursor changes to
Attributes bar now looks like this:
You can select the colors and stitches at this step or after creating the pattern. See "Color" on
page 117 and "Stitch" on page 119.
You can also set the sewing attributes using the
144).
You must decide now which kind of circle-related graphic you need.
2
Click the
Arc shape
3
Proceed as you would to draw a circle or an ellipse.
When you release the mouse, a radial line appears on the ellipse.
4
Move the cursor (without dragging) to the start point of the arc & string and click.
The radial line disappears.
5
Move the cursor (without dragging) to the end point of the arc & string and click.
Click at start point
104
selector, then click
Fan Shape
Move to end point
selector, then click
Arc & String
Move to end point
menu (see "Sewing Attribute Setting" on page
Sew
.
and displays together with a small ellipse. The Sewing
menu (see "Sewing Attribute Setting" on page
Sew
.
Click at end point
Click at end point