Deleting Points; Realigning - Brother PE-DESIGN2.0 Instruction Manual

Deleting points

1
Click on the Tool Box.
Two buttons appear:
2
Click . The shape of the cursor changes to
3
Click the pattern that you want to edit.
The pattern can be a broken line, a curve or a manual punching pattern.
The existing points of the pattern are marked with small empty squares.
4
Click the point that you want to delete.
The selected point is now marked with a small black square.
You can select more than one point by clicking them while holding the
dragging the mouse across the area.
5
Press the
Delete
selected, a pair of points is deleted.
4

Realigning

1
Click on the Tool Box.
Two buttons appear:
2
Click . The shape of the cursor changes to
the Tool Box button.
3
Click the pattern that you want to edit.
The pattern can be a broken line or a curve.
The existing points of the pattern are marked with small empty squares.
4
Click the point that you want to realign.
If the point was on a curved part, it is now on a broken line and vice versa.
NOTE:
When the point is on a curved part, you can use the handle to reorient the tangent (see "Reorient-
ing a tangent to a point" on page 98.
.
key to remove the point from the path. When a manual punching pattern is
Delete
5
.
.
Shift
and displays together with a small image of
key down, or by
99