Using The Tool Box - Brother PE-DESIGN2.0 Instruction Manual

Patterns are created and edited using the Tool Box and the Sewing Attributes bar.
Clicking a button of the Tool Box changes the cursor mode and shape. The left side of the Status bar tells
you what you can do in each cursor mode.
Sets the cursor in selection mode. When you start the application, the selec-
tion mode is active by default. Cursor shape:
Sets the cursor in point edit mode.
Cursor shape:
Sets the cursor in zoom mode.
Cursor shape:
Sets the cursor in text input mode.
Cursor shape:
Sets the cursor in circle and arc drawing mode.
Cursor shape:
Sets the cursor in rectangle drawing mode.
Cursor shape:
Sets the cursor in line drawing mode.
Cursor shape:
Sets the cursor in curve drawing mode.
Cursor shape:
Sets the cursor in manual punching mode.
Cursor shape:
94

Using the Tool Box

or
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
with a miniature of the tool button
page 95
page 97
page 100
page 101
page 102
page 105
page 105
page 106
page 107