Writing To An Original Card; Operation - Brother PE-DESIGN2.0 Instruction Manual

IMPORTANT: If you are using our company's scanner system, use two separate sets of original cards:
one for the scanner system, and one for this system.

Operation

To transfer an embroidery file that you have created or edited with Layout & Editing to an original card,
proceed as follows:
1
Click the arrow button in the
The application will first check that there is no problem with the card module and the card inserted.
If no problem is detected, a
•
As you select a file to be transferred to the card, its file
name moves to the list on the right. However, if the avail-
able space on the card is not sufficient, the file is not
selected, and this message appears:
The same message appears when you click
and there is not enough space on the card.
Click to remove the message and try with other
OK
file(s).
164

Writing to an Original Card

Write to Original Card
Write to Original Card
Select All
area.
dialog similar to this displays.
The current folder and the
it contains are shown.
Click a file name in the left file box,
then click
Select
step to select more than one file.
Click
Select All
the folder.
To deselect a file, click its file name
in the right file box, then click
.
lect
To deselect all selected files, click
.
Deselect All
Click a file name, then click
to see the embroidery image. Click
to remove the preview.
OK
Click
Browse
Click to write the selected
Write
file(s) to the card.
Click to remove the dialog
Close
from the screen.
files
*.PES
. You can repeat this
to select all files in
Dese-
Preview
to change the folder.