Brother PE-DESIGN2.0 Instruction Manual page 171

4
If you don't type anything, this message will appear.
5
When you click
OK
Note that it is better to switch your computer off before connecting any peripheral.
6
If the card module is ready and no problems are detected, the application starts transferring the
data from the card to the specified folder. The application informs you that the transfer is in
progress.
7
Wait until the transfer is completed.
When the transfer is complete, the
8
The
Install Embroidery Card
on the dialog with a valid prefix, this message displays.
Prefix Setting
Installation is completed
dialog reappears, showing the new file.
Click to remove the message
OK
and return to the previous dialog.
Check that the card module is con-
nected and powered, and that a card
is inserted. If necessary, connect the
module and its power adaptor, and
insert a card.
Click to start installing.
OK
Click to exit.
Cancel
message displays.
Click to remove the message.
OK
Check that the new file appears in
the box.
Files
Click to remove the dialog
Close
from the screen.
161