Reading From An Embroidery Card; Operation - Brother PE-DESIGN2.0 Instruction Manual

Reading from an Embroidery Card

Operation

To transfer embroidery data from an embroidery card to your hard disk, proceed as follows:
1
Click the arrow button in the
An
Install Embroidery Card
2
If you click
Browse
3
When you click
Install
file.
The resulting file name will be made of the characters that you input here (the prefix), followed with
the three digits. The file name extension
160
Install Embroidery Card
dialog similar to this displays.
, this dialog will display.
on the
Install Embroidery Card
area.
The current folder and the
it contains are shown.
Click
Click
current folder.
Click
from the screen.
Select the drive and folder. If necessary, type a
new folder name.
Click to confirm the new folder and return
OK
to the
Install Embroidery Card
folder is new, a message will inform you that
the folder is going to be created. Click
remove the message.)
Click to return to the
Cancel
dialog without changing the folder.
Card
dialog, you are asked to enter a prefix for the
will be added automatically.
PEC
Type a name for the file.
Click
Click
Embroidery Card
*.PEC
to change the folder.
Browse
to install the data in the
Install
to remove the dialog
Close
dialog. (If the
Install Embroidery
to start.
OK
to return to the
Cancel
.
files
to
OK
Install