Drawing An Arc & String; Selecting The Circle/Arc Type - Brother PE-DESIGN V7 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)
Click at start point.
Move to end point.
Drawing an arc & string
1.
Click on the Tool Box.
→ The shape of the pointer changes to
, and the Sewing Attributes bar
appears similar to the one shown below.
b
Memo:
• You can change the color and sew type
either before or after drawing the shape. For
more details on changing these settings,
refer to "Color" on page 149 and "Sew type"
on page 150.
• You can also use the settings in the Sewing
Attribute Setting dialog box to define other
attributes of the shape. (For more details, refer
to "Specifying sewing attributes" on
page 151.) If you do not change these
settings at this time, the current settings will be
applied, however you can modify them later.
2.
Click in the Arc shape selector, and then click
Arc & String.
3.
Proceed as you would to draw a circle or an oval.
→ A radial line appears on the oval when the
mouse button is released.
Click at end point.
4.
Move the pointer to the start point of the arc &
string, and then click.
→ The radial line disappears.
5.
Move the pointer until the arc & string has the
desired shape, and then click.
Click at start point.
Move to end point.

Selecting the circle/arc type

I
Arc shape
Use this selector to select the type of arc.
b
Memo:
The Arc shape selector appears in the
Sewing Attributes bar when
Box is selected.
1.
Click in the Arc shape selector.
→ The settings appear.
2.
Click one of the settings.
→ The setting is applied to all patterns that
will be created with the Circle or Arc tool,
until the setting is changed.
Click at end point.
on the Tool
120