Filter Ethernet-Type Enable - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
Default
Command Mode
Example
Enterprise AP(config)#filter uplink add 00-12-34-56-78-9a
Enterprise AP(config)#

filter ethernet-type enable

This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this
feature.
Syntax
Default
Command Mode
Command Usage
Example
Enterprise AP(config)#filter ethernet-type enable
Enterprise AP(config)#
Related Commands
I
NTERFACE
Disabled
Global Configuration
[no] filter ethernet-type enable
Disabled
Global Configuration
This command is used in conjunction with the filter ethernet-type
protocol command to determine which Ethernet protocol types are to be
filtered.
filter ethernet-type protocol (5-83)
5-82