Mac-Authentication Session-Timeout; Filtering Commands - 3Com 3CRWE876075 User Manual

Related Commands
address filter entry (5-77)
radius-server address (5-65)
802.1x-supplicant user (5-74)

mac-authentication session-timeout

This command sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication database. Use the no
form to disable reauthentication.
Syntax
mac-authentication session-timeout <minutes>
minutes - Re-authentication interval. (Range: 0-1440)
Default
0 (disabled)
Command Mode
Global Configuration
Example
Enterprise AP(config)#mac-authentication session-timeout 1
Enterprise AP(config)#

Filtering Commands

The commands described in this section are used to filter communications
between wireless clients, control access to the management interface from
wireless clients, and filter traffic using specific Ethernet protocol types.
Table 22 Filtering Commands
Command
filter local-bridge
filter ap-manage
filter uplink enable
filter uplink
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Function
Disables communication between wireless clients
Prevents wireless clients from accessing the
management interface
Ethernet port MAC address filtering
Adds or deletes a MAC address from the filtering table GC
Ethernet packets against the protocol filtering table
5-79
Using the Command Line Interface
Mode
GC
GC
GC
GC
Page
5-80
5-81
5-81
5-81
5-82