Bridge Stp Enable; Bridge Stp Forwarding-Delay - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
Command
show bridge stp
show bridge link

bridge stp enable

This command enables the Spanning Tree Protocol. Use the no form to disable
the Spanning Tree Protocol.
Syntax
Default Setting
Command Mode
Example
This example globally enables the Spanning Tree Protocol.
Enterprise AP(config)bridge stp enable
Enterprise AP(config)

bridge stp forwarding-delay

Use this command to configure the spanning tree bridge forward time globally
for the wireless bridge. Use the no form to restore the default.
Syntax
I
NTERFACE
[no] bridge stp enable
Enabled
Global Configuration
bridge stp forwarding-delay <seconds>
no bridge stp forwarding-delay
seconds - Time in seconds. (Range: 4 - 30 seconds)
The minimum value is the higher of 4 or [(max-age / 2) + 1].
Function
Displays the global spanning tree settings
Displays current bridge settings for specified interfaces Exec
5-92
Mode Page
Exec 5-96
5-90