Delete - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
Example
The following example shows how to upload the configuration settings to a file
on the TFTP server:
Enterprise AP#copy config tftp
TFTP Source file name:syscfg
TFTP Server IP:192.254.2.19
Enterprise AP#
The following example shows how to download a configuration file:
Enterprise AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:syscfg
TFTP Server IP:192.254.2.19
Enterprise AP#

delete

This command deletes a file or image.
Syntax
Default Setting
Command Mode
NOTE: Beware of deleting application images from flash memory. At least one
application image is required in order to boot the access point. If there are
multiple image files in flash memory, and the one used to boot the access point is
deleted, be sure you first use the bootfile command to update the application
image file booted at startup before you reboot the access point.
I
NTERFACE
delete <filename>
filename - Name of the configuration file or image name.
None
Exec
[1]:2
5-62