C
5: C
L
HAPTER
OMMAND
INE
Default Setting
Command Mode
Example
Enterprise AP(config)#prompt RD2
RD2(config)#
system name
This command specifies or modifies the system name for this device. Use the no
form to restore the default system name.
Syntax
Default Setting
Command Mode
Example
Enterprise AP(config)#system name AP
Enterprise AP(config)#
username
This command configures the user name for management access.
Syntax
I
NTERFACE
Enterprise AP
Global Configuration
system name <name>
no system name
name - The name of this host.
(Maximum length: 32 characters)
Enterprise AP
Global Configuration
username <name>
name - The name of the user.
(Length: 3-16 characters, case sensitive)
5-16