Key - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
Example
Enterprise AP(if-wireless g: VAP[0])#encryption
Enterprise AP(if-wireless g)#
Related Commands

key

This command sets the keys used for WEP encryption. Use the no form to delete
a configured key.
Syntax
Default Setting
Command Mode
Command Usage
I
NTERFACE
key (5-134)
key <index> <size> <type> <value>
no key index
• index - Key index. (Range: 1-4)
• size - Key size. (Options: 64, 128, or 152 bits)
• type - Input format. (Options: ASCII, HEX)
• value - The key string.
- For 64-bit keys, use 5 alphanumeric characters or 10 hexadecimal digits.
- For 128-bit keys, use 13 alphanumeric characters or 26 hexadecimal
digits.
- For 152-bit keys, use 16 alphanumeric characters or 32 hexadecimal
digits.
None
Interface Configuration (Wireless)
• To enable Wired Equivalent Privacy (WEP), use the auth shared-key
command to select the "shared key" authentication type, use the key
command to configure at least one key, and use the transmit-key
command to assign a key to one of the VAP interfaces.
• If WEP option is enabled, all wireless clients must be configured with the
same shared keys to communicate with the access point.
• The encryption index, length and type configured in the access point must
match those configured in the clients.
5-134