Using The 3Com Installation Cd; Launch The 3Com Wireless Infrastructure Device Manager Utility; Launching The 3Com Wireless Interface Device Manager - 3Com 3CRWE876075 User Manual

C 3: I C
HAPTER NITIAL ONFIGURATION
1
2
U
The 3Com Installation CD contains the following tools and utilities: 3Com
Wireless Infrastructure Device Manager-an administration tool that helps you
select 3Com wireless LAN devices and launch their configurations in your Web
browser.
L
M
1
2
3
4
5
L
To be able to configure the Access Point you need to run the Wireless Interface
Device Manager. Go to Start > Programs > 3Com Wireless > Wireless
Interface Device Manager.
If the device is working correctly the following screen should be seen.
Connect a computer directly to the Access Point using the supplied standard
Category 5 UTP Ethernet cable.
Enter the Access Point's default IP address (169.254.2.1) into the computer's
web browser. If the Configuration Management System starts, the Access
Point is using the factory assigned IP address. You can configure the Access
Point with the following login information:
Login name: admin
Password: password
If the Configuration Management System does not start, the Access Point is
on a different subnet than the computer. Install and start the 3Com Wireless
Infrastructure Device Manager to discover the Access Point's IP address.
3C
SING THE OM
3COM W
AUNCH THE
(W
ANAGER IDMAN
Turn on the computer.
Insert the 3Com Installation CD into the CD-ROM drive.
The CD will Autorun. If it does not Autorun, you can start the setup menu
from the Windows Start menu. For example: Start > Run > d: setup.exe.
In the menu, click Tools and Utilities.
In the next screen, click the software you want to install.
Follow the on screen instructions to complete the installation.
Reboot the computer if prompted to do so.
3
AUNCHING THE
I CD
NSTALLATION
I
IRELESS NFRASTRUCTURE
)
UTILITY
W I
COM IRELESS
3-2
D
EVICE
D
NTERFACE EVICE
M
ANAGER