Radius-Server Address; Radius-Server Port - 3Com 3CRWE876075 User Manual

Command
radius-server vlan-format
show radius

radius-server address

This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server [secondary] address <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Enterprise AP(config)#radius-server address 192.254.2.25
Enterprise AP(config)#

radius-server port

This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for authentication messages.
(Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
Function
Sets the format for specifying VLAN IDs on the
RADIUS server
Shows the current RADIUS settings
5-65
Using the Command Line Interface
Mode
GC
Exec
Page
5-69
5-69