Snmp-Server Engine-Id - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
Default Setting
Command Mode
Command Usage
Example
Enterprise AP(config)#no snmp-server trap dot11StationAssociation
Enterprise AP(config)#

snmp-server engine-id

This command is used for SNMP v3. It is used to uniquely identify the access point
among all access points in the network. Use the no form to delete the engine ID.
Syntax
Default Setting
Command Mode
Command Usage
Example
Enterprise AP(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
Enterprise AP(config)#
I
NTERFACE
All traps enabled
Global Configuration
This command is used in conjunction with the snmp-server host and
snmp-server enable server commands to enable SNMP notifications.
snmp-server engine-id <engine-id>
no snmp-server engine-id
engine-id - Enter engine-id in hexadecimal (5-32 characters).
Enabled
Global Configuration
• This command is used in conjunction with the
• Entering this command invalidates all engine IDs that have been previously
configured.
• If the engineID is deleted or changed, all SNMP users will be cleared. You
will need to reconfigure all existing users
5-50
command.
snmp-server user