Management-Vlanid - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE
vlan
This command enables VLANs for all traffic. Use the no form to disable VLANs.
Syntax
Default
Command Mode
Command Description
Example
Enterprise AP(config)#vlan enable
Reboot system now? <y/n>: y
Related Commands

management-vlanid

This command configures the management VLAN ID for the access point.
Syntax
I
NTERFACE
[no] vlan enable
Disabled
Global Configuration
• When VLANs are enabled, the access point tags frames received from
wireless clients with the VLAN ID configured for each client on the RADIUS
server. If the VLAN ID has not been configured for a client on the RADIUS
server, then the frames are tagged with the access point's native VLAN ID.
• Traffic entering the Ethernet port must be tagged with a VLAN ID that
matches the access point's native VLAN ID, or with a VLAN tag that
matches one of the wireless clients currently associated with the access
point.
management-vlanid (5-146)
management-vlanid <vlan-id>
vlan-id - Management VLAN ID. (Range: 1-4094)
5-146