Show Snmp Groups - 3Com 3CRWE876075 User Manual

Default Setting
None
Command Mode
Global Configuration
Example
Enterprise AP(config)#snmp-server filter-assignments mytraps trapfilter
Enterprise AP(config)#exit
Enterprise AP#show snmp target
Host ID : mytraps
User : chris
IP Address : 192.254.2.33
UDP Port : 162
=============================
Enterprise AP#show snmp filter-assignments
Enterprise AP(config)#

show snmp groups

This command displays the SNMP v3 pre-defined groups.
Syntax
show snmp groups
Command Mode
Exec
HostID FilterID
mytraps trapfilter
5-55
Using the Command Line Interface