Tape Compression - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tape compression

To configure tape compression, use the tape-compression command. To disable this feature, use the no
form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines Use this command to compress encrypted data.
Examples
The following example enables tape compression
switch#config t
switch(config)#sme cluster c1
switch(config-sme-cl)#tape-compression
The following example disables tape compression
switch#config t
switch(config)#sme cluster c1
switch(config-sme-cl)#no tape-compression
Related Commands Command
show sme cluster tape
show sme cluster
clear sme
OL-18089-01, Cisco MDS NX-OS Release 4.x
tape-compression
no tape-compression
Modification
This command was introduced.
Description
Displays information about all tape volume groups or a specific group
Displays information about the Cisco SME cluster
Clears Cisco SME configuration.
Cisco MDS 9000 Family Command Reference
tape compression
23-15