Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1531

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command History Release
1.3(1)
3.0(1)
Usage Guidelines This command is only available when the TACACS+ feature is enabled using the tacacs+ enable
command.
When the idle time interval is 0 minutes, periodic TACACS+ server monitoring is not performed.
Examples
The following example configures TACACS+ authentication.
switch# config terminal
switch(config)# tacacs-server host 10.10.2.3 key HostKey
switch(config)# tacacs-server host tacacs2 key 0 abcd
switch(config)# tacacs-server host tacacs3 key 7 1234
switch(config)# tacacs-server host 10.10.2.3 test idle-time 10
switch(config)# tacacs-server host 10.10.2.3 test username tester
switch(config)# tacacs-server host 10.10.2.3 test password 2B9ka5
Related Commands Command
show tacacs-server
tacacs+ enable
OL-18089-01, Cisco MDS NX-OS Release 4.x
Modification
This command was introduced.
Added the ipv6-address argument and the test option.
Description
Displays TACACS+ server information.
Enables TACACS+.
Cisco MDS 9000 Family Command Reference
tacacs-server host
23-9