Chapter 23 T Command; Tacacs+ Abort - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

tacacs+ abort

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tacacs+ abort
To discard a TACACS+ Cisco Fabric Services (CFS) distribution session in progress, use the tacacs+
abort command in configuration mode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to discard a TACACS+ CFS distribution session in progress.
switch# config terminal
switch(config)# tacacs+ abort
Related Commands Command
show tacacs+
tacacs+ distribute
tacacs+ enable
Cisco MDS 9000 Family Command Reference
23-2
tacacs+ abort
Modification
This command was introduced.
Description
Displays TACACS+ CFS distribution status and other details.
Enables CFS distribution for TACACS+.
Enables TACACS+.
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x