Tcp Max-Retransmissions - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

tcp max-retransmissions

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tcp max-retransmissions
To specify the maximum number of times a packet is retransmitted before TCP decides to close the
connection, use the tcp max-retransmissions command. Use the no form of this command to disable
this feature or revert to its factory defaults.
Syntax Description
number
Defaults Enabled.
Command Modes FCIP profile configuration submode.
Command History Release
1.1(1)
Usage Guidelines The default is 4 and the range is from 1 to 8 retransmissions.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
The following example specifies the maximum number of retransmissions :
switch(config-profile)# tcp max-retransmissions 6
Related Commands Command
fcip profile
show fcip profile
Cisco MDS 9000 Family Command Reference
23-34
tcp max-retransmissions number
no tcp max-retransmissions number
Modification
This command was introduced.
Description
Configures FCIP profile parameters.
Displays FCIP profile information.
Specifies the maximum number. The range is 1 to 8.
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x