Tcp Min-Retransmit-Time - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tcp min-retransmit-time

To control the minimum amount of time TCP waits before retransmitting, use the tcp
min-retransmit-time command. Use the no form of this command to disable this feature or revert to its
factory defaults.
Syntax Description
milliseconds
Defaults 300 milliseconds.
Command Modes FCIP profile configuration submode.
Command History Release
1.1(1)
Usage Guidelines None.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
switch(config-profile)#
The following example specifies the minimum TCP retransmit time for the TCP connection:
switch(config-profile)# tcp min-retransmit-time 500
Related Commands Command
fcip profile
show fcip profile
OL-18089-01, Cisco MDS NX-OS Release 4.x
tcp min-retransmit-time milliseconds
no tcp min-retransmit-time milliseconds
Modification
This command was introduced.
Description
Configures FCIP profile parameters.
Displays FCIP profile information.
Specifies the time in milliseconds. The range is 200 to 5000.
Cisco MDS 9000 Family Command Reference
tcp min-retransmit-time
23-35