Tcp-Connection - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

tcp-connection

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tcp-connection
To configure the number of TCP connections for the FCIP interface, use the tcp-connection command.
To revert to the default, use the no form of the command.
Syntax Description number
Defaults
Two attempts.
Command Modes Interface configuration submode.
Command History Release
1.1(1)
Usage Guidelines
Access this command from the
Use the tcp-connection option to specify the number of TCP connections from a FCIP link. By default,
the switch tries two (2) TCP connections for each FCIP link.
Examples The following example configures the TCP connections.
switch# config terminal
switch(config)# interface fcip 50
switch(config-if)# tcp-connection 1
switch(config-if)# no tcp-connection 1
Related Commands Command
show interface fcip
Cisco MDS 9000 Family Command Reference
23-42
tcp-connection number
no tcp-connection number
Enters the number of attempts (1 or 2).
Modification
This command was introduced.
Description
Displays an interface configuration for a specified FCIP interface.
submode.
switch(config-if)#
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x