Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1512

show zone
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
VSAN: 1 default-zone: deny distribute: active only Interop: default
Default zone:
Full Zoning Database :
Active Zoning Database :
Status:
............
VSAN: 3 default-zone: deny distribute: active only Interop: default
Default zone:
Full Zoning Database :
Active Zoning Database :
Status:
The following example checks the status of the zoneset distribute vsan command and displays the
default zone attributes of a specific VSAN or all active VSANs.
switch# show zone status vsan 1
VSAN:1 default-zone:deny distribute:active only Interop:default
Default zone:
Full Zoning Database :
Active Zoning Database :
Status:
Table 22-11
Table 22-11
Field
VSAN:
default-zone:
Default zone:
distribute:
Interop:
mode:
merge control:
Hard zoning is enabled
Full Zoning Database:
Cisco MDS 9000 Family Command Reference
22-444
mode: basic merge-control: allow session: none
hard-zoning: enabled
qos: low broadcast: disabled ronly: disabled
Zonesets:0 Zones:0 Aliases: 0
Database Not Available
mode: basic merge-control: allow session: none
hard-zoning: enabled
qos: low broadcast: disabled ronly: disabled
Zonesets:0 Zones:0 Aliases: 0
Database Not Available
mode:basic merge-control:allow session:none
hard-zoning:enabled
qos:low broadcast:disabled ronly:disabled
Zonesets:0 Zones:0 Aliases:0
Database Not Available
describes the significant fields shown in the show zone status vsan display.
show zone status Field Descriptions
Description
VSAN number displayed
Default-zone policy either permit or deny.
The Default zone field displays the attributes for the specified
VSAN. The attributes include: Qos level, broadcast zoning
enabled/disabled, and read-only zoning enabled/disabled.
Distribute full-zone set (full) or active-zone set (active only).
Displays interop mode. 100 = default, 1 = standard, 2 and 3 =
Non-Cisco Vendors.
Displays zoning mode either basic or enhanced.
Displays merge policy either allow or restrict.
If hardware resources (TCAM) becomes full, hard zoning is
automatically disabled.
Displays values of zone database.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x