Tacacs+ Commit - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tacacs+ commit

To apply the pending configuration pertaining to the TACACS+ Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the tacacs+ commit command in configuration mode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to apply a TACACS+ configuration to the switches in the fabric.
switch# config terminal
switch(config)# tacacs+ commit
Related Commands Command
show tacacs+
tacacs+ enable
tacacs+ distribute
OL-18089-01, Cisco MDS NX-OS Release 4.x
tacacs+ commit
Modification
This command was introduced.
Description
Displays TACACS+ CFS distribution status and other details.
Enables TACACS+.
Enables CFS distribution for TACACS+.
Cisco MDS 9000 Family Command Reference
tacacs+ commit
23-3