Tape-Device - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

tape-device

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-device
To configure a crypto tape device, use the tape-device command. To disable this feature, use the no form
of the command.
Syntax Description device name
Defaults
None.
Command Modes Cisco SME tape volume configuration submode.
Command History Release
3.2(2)
Usage Guidelines
The tape device commands are available in the (config-sme-cl-tape-bkgrp-tapedevice) submode.
Examples
The following example configures a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
The following example removes a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# no tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
Related Commands Command
show sme cluster tape
show sme cluster
clear sme
Cisco MDS 9000 Family Command Reference
23-16
tape-device device name
no tape-device device name
Specifies the name of the tape device.
Modification
This command was introduced.
Description
Displays information about all tape volume groups or a specific group
Displays information about the Cisco SME cluster
Clears Cisco SME configuration.
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x