Tape-Bkgrp - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

tape-bkgrp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-bkgrp
To configure a crypto tape backup group, use the tape-bkgrp command. Use the no form of this
command to disable this feature.
Syntax Description groupname
Defaults
None.
Command Modes Cisco SME cluster configuration mode submode.
Command History Release
3.2(2)
Usage Guidelines
A tape volume group is a group of tapes that are categorized by function. For example, HR1 could be
designated tape volume group for all Human Resources backup tapes.
Adding tape groups allows you to select VSANs, hosts, storage devices, and paths that Cisco SME will
use for encrypted data. For example, adding a tape group for HR data sets the mapping for Cisco SME
to transfer data from the HR hosts to the dedicated HR backup tapes.
Examples
The following example adds a backup tape group:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)#
The following example removes a backup tape group:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)#
Related Commands Command
clear sme
show sme cluster
Cisco MDS 9000 Family Command Reference
23-14
tape-bkgrp groupname
no tape-bkgrp groupname
Specifies the backup tape group.
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about the Cisco SME cluster
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x