Telnet - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

telnet

To log in to a host that supports Telnet, use the telnet command in EXEC mode.
Syntax Description
hostname
ip-address
port
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example establishes a Telnet session to the specified IP address.
switch# telnet 172.22.91.153
Trying 172.22.91.153...
Connected to 172.22.91.153.
Login:xxxxxxxx
Password:xxxxxxxxx
switch#
Related Commands Command
telnet server enable
OL-18089-01, Cisco MDS NX-OS Release 4.x
telnet {hostname | ip-address} [port]
Specifies a host name. Maximum length is 64 characters.
Specifies an IP address.
(Optional) Specifies a port number. The range is 0 to 2147483647.
Modification
This command was introduced.
Description
Enables the Telnet server.
Cisco MDS 9000 Family Command Reference
telnet
23-43