Tape-Keyrecycle - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tape-keyrecycle

To configure tape key recycle policy, use the tape-keyrecycle command. To disable this feature, use the
no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines Cisco SME allows you to recycle the tape keys. If you enable tape key recycling, all the previous
instances of the tape key will be deleted. If you do not enable tape key recycle, all the previous instances
and the current instance of the tape key is maintained, and the current instance is incremented by 1. (???)
Examples The following example enables tape key recycling:
switch# config t
switch(config)#sme cluster c1
switch(config-sme-cl)#tape-keyrecycle
The following example disables tape key recycling:
switch# config t
switch(config)#sme cluster c1
switch(config-sme-cl)#no tape-keyrecycle
OL-18089-01, Cisco MDS NX-OS Release 4.x
tape-keyrecycle
no tape-keyrecycle
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
tape-keyrecycle
23-17