Udp Statistics; Igmp Multicast Group Statistics - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

UDP statistics

The following command displays UDP statistics:
show ip udp counters
Command mode: All except User EXEC
UDP statistics:
udpInDatagrams:
udpInErrors:
The following table describes the User Datagram Protocol (UDP) statistics:
Table 61 UDP statistics
Statistics
udpInDatagrams
udpOutDatagrams
udpInErrors
udpNoPorts

IGMP Multicast Group statistics

The following command displays statistics about the use of the IGMP Multicast Groups:
show ip igmp counters
Command mode: All except User EXEC
IGMP Snoop vlan 1 statistics:
------------------------------------------------------------
rxIgmpValidPkts:
rxIgmpGenQueries:
rxIgmpGroupSrcSpecificQueries:
rxIgmpLeaves:
txIgmpReports:
txIgmpLeaves:
rxIgmpV3SourceListChangeRecords:
These commands enable you to display statistics regarding the use of the IGMP Multicast Groups.
54 udpOutDatagrams:
0 udpNoPorts:
Description
The total number of UDP datagrams delivered to the switch.
The total number of UDP datagrams sent from this switch.
The number of received UDP datagrams that could not be delivered for reasons other
than the lack of an application at the destination port.
The total number of received UDP datagrams for which there was no application at the
destination port.
43
1578077
0 rxIgmpInvalidPkts:
0 rxIgmpGrpSpecificQueries:
0
0 rxIgmpReports:
0 txIgmpGrpSpecificQueries:
0 rxIgmpV3CurrentStateRecords:
0 rxIgmpV3FilterChangeRecords:
Statistics Commands
0
0
0
0
0
0
83