Arp Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

The following table describes the Tag parameter.
IP Routing Tag information
Table 30
Field
fixed
static
addr
rip
ospf
broadcast
martian

ARP information

The Address Resolution Protocol (ARP) information includes IP address and MAC address of each entry,
address status flags, VLAN, and port for the address, and port referencing information.
The following table describes the Address Resolution Protocol commands.
ARP information
Table 31
Command
show ip arp find <IP address>
show ip arp interface <port number>
show ip arp vlan <1-4095>
show ip arp
show ip arp reply
Description
The address belongs to a host or subnet attached to the switch.
The address is a static route which has been configured on the switch.
The address belongs to one of the switch's IP interfaces.
The address was learned by the Routing Information Protocol (RIP).
The address was learned by Open Shortest Path First (OSPF).
Indicates a broadcast address.
The address belongs to a filtered group.
Usage
Displays a single ARP entry by IP address.
Command mode: All except User EXEC
Displays the ARP entries on a single port.
Command mode: All except User EXEC
Displays the ARP entries on a single VLAN.
Command mode: All except User EXEC
Displays all ARP entries, including:
IP address and MAC address of each entry
Address status flag
The VLAN and port to which the address belongs
The ports which have referenced the address (empty if no
port has routed traffic to the IP address shown)
Command mode: All except User EXEC
Displays the ARP address list: IP address, IP mask, MAC address,
and VLAN flags.
Command mode: All except User EXEC
Information Commands
46